Hard & durable, crystal clear with cross linked protection - fast drying, it protects a wide range of surfaces. This high quality cross linked lacquer dries to a hard, crystal clear satin or high gloss film, with extremely good sanding properties & is specially formulated to bond to a wide range of surfaces - it can also be used as a multi surface primer. Ideal for - metal surfaces , laminate, timber surfaces , tile, ceramic, glass, plastics Unique qualities Interior Very hard & durable finish 1-2 hour drying time Water resistant Stain resistant Heat resistant Water wash up Preparation All surfaces must be clean & free from dust, dirt, oil & contamination. Timber: Remove oils/resins from oily hardwoods & resinous softwoods. Sand to a smooth finish & remove all dust. Application Ensure the product is well mixed but do not shake. Use a good quality synthetic varnish brush & apply evenly using light brush strokes. Apply the first coat & allow to dry. To prime porous surfaces dilute with 10% water. Apply one or two further coats. Caution Always apply to a test area before starting work. Do not apply over uncured oil based paint. When applied over emulsion/latex paint, it is possible that the lacquer can draw certain stains through the paint, which would not otherwise be visible. Storage Protect from extremes of temperature during storage & application. Health, Safety & the Environment Non-hazardous. Ensure good ventilation. Keep out of reach of children. Contact with eyes - wash immediately with warm water. Remove excess from tools & mixing vessels before washing in warm soapy water. Do not empty into drains or watercourses. Polyvine Crystal Clear Interior & Exterior Lacquer Varnish, Multi-Surface Primer, Satin/High Gloss Finish, Stain/Water/Heat Resistant
